Cycle Visions Eliminator Tail Light Assembly

Recently we got to install one of these units on an ’08 Fatboy. Installation couldn’t be easier. Remove the existing license plate frame and tail light, install the mounting plate of the Eliminator with a single screw, plug in the wiring harness to the factory harness, and then screw in the top plate with 4 machine screws. Simple! Installation took approximately 30 mins. One thing you should know… you will need to cut down a 5/32 allen wrench to be able to tighten the top plate. There is very little room between the fender base plate.

The customer was very happy with the unit, and let me tell you… the LEDs are really bright on this thing! It has a great pulsing action on the lights when you brake to alert drivers behind you. We are looking forward to installing these many more bikes!

Features include:

• Includes run, turn and brake controller (controls these lights only)
• Illuminates amber
• LED lighting
• A stylish Pyramid Cover is available to cover the three holes let behind (only applies to Softails) when relocating stock license plates above the stock tail light, or the Eliminator tail light on your rear fender.

Available in black powder coat or chrome finish.

Check out our website for more information on the Cycle Visions Eliminator Tail Light Assembly